Questions and Answers Available
You are here : Askhoo » Hobbies & Crafts » Currently Reading:

How to Solder Silver Jewelry

You may have similar questions as How to Solder Jump Rings and How to Solder Copper Pipe,or you may also seek several useful information about How To Fix Silver Soldered Jewelry. In addition,you may be interested in answers related to Soldering Jewelry Tutorial,too. Read more as following:

To solder silver jewelry you will need a solder iron and some silver solder. You'll need to plug the solder iron in until it gets hot, about 2 minutes. Then take the silver solder and gently tap the end of the iron against it while holding it over the silver jewelry you are soldering. The solder will become liquid form and will then harden very quickly.


Some information by our algorithm and check these resources as below:

How to solder jump rings?

1. Cut the sheet solder into squares smaller than 1 mm with the tin snips. Place the small cut pieces into the small container to keep them safe. 2. Pry open a jump ring with the round nose pliers and apply a tiny bit of flux on each end with the pai… More »

How to Solder Copper Pipes?

Learning how to solder copper pipe is a skill useful for plumbing. Soldering can be dangerous so you need to practice safety measures and always wear protective gear. … More »

How to fix silver soldered jewelry?

1. Clean the silver jewelry with soap and water. Examine the clean jewelry to determine the cause and extent of the damage. 2. Prepare the broken portion of the jewelry for soldering. Arrange the broken area of the jewelry with pliers so the seam to… More »

How to make jewelry silver solder?

1. Place the metal sheet on your solder station and use your flux applicator to coat the entire area. 2. Get pieces of solder about the size of a grain of salt and place them on one side of your solder station. Have a soldering pick ready. 3. Use you… More »

How to solder sterling silver jewelry?

1. Gather materials. Pay close attention to the kind of silver solder you decide to purchase. It comes in three types-hard, medium and easy. Easy, melts at the lowest temperature, while hard melts at the highest temperature. The kind of silver solder… More »

How to Solder Stained Glass?

Place the glass on a towel so it will be sturdy and you don’t get hurt. You will then use a glass cutter to make what is called a single score. Only make one score to get a clean break. Then you can break the glass along the line you had made for the… More »

Nav Links:
If you have something to share or you are an expert on it,share your knowledge with us.

14comments

  1. Milvia says:

    I would like to solder charms onto a charm bracelet, but do not have a clue as to how to begin.

  2. Lelanie says:

    like this: http://www.etsy.com/view_listing.php?listing_id=24017681

    I have always been curious. I don’t suppose its PMC or crafters aluminum?

    What do you need to make sterling silver jewelry? How do you make it?

  3. Asian Pride says:

    i.e. a sterling silver bracelet from Macy’s versus one from Tiffany and Co. I’m strictly speaking on the quality of the sterling. Thanks!

  4. Leela says:

    I am interested in trying soldering with my jewelry, but how exactly does it work? Are there things I should avoid soldering? Do I need a soldering station? What tools would I need? What sort of budget does soldering require?

  5. Kitty says:

    My friends ring had to be cut off today because her fingers were very swollen or something. Anyways she wants me to solder it back together so she can put it on a necklace. Can I use regular electrical solder it’s all I’ve got.

  6. Gabi Roe says:

    I am making silver jewellery and on a very tight money and space budget (I’m working from my tiny apartment!) can you get enough heat from a cooks butane torch (for making creme brûlée)? I would only be attaching surface-to-surface, not end-to-end.

    Thanks for the help

  7. Thomas says:

    I am also wondering why is the melting point of the solder important to the industry that uses it?

  8. Shannon Callah says:

    I am doing some silver soldering and I have to use jewellers pickle which is acid based, but mild. What kind of container can I use. I believe some kind of poly plastic is suitable.. Anyone know please?

  9. Darcy The Hound says:

    It would be nice to have something better than glue to assemble my jewelry. I use mostly metal findings to create more artistic pieces, so is a soldering iron a good tool? Thanks!

  10. Horsegurl22 says:

    I am looking for nice gifts for my wedding to give out and I came across some very nice sterling silver jewelry. I was looking for white gold and saw some items that were sterling silver and I was just wondering if over time they (ster.silv.) will tarnish.

  11. Kaylee says:

    i need this for science class, why is gold and silver used to make jewellery?

  12. Madonna says:

    i want to learn or take a workshop in repairing silver- like bowls etc. and polishing silver. I am spending a month in Jerusalem in early January and am interested in a course. Thanks!

  13. Kimp says:

    thank you

Share your idea