Questions and Answers Available
You are here : Askhoo » Home and Garden » Currently Reading:

Whats the best way to get melted plastic off a stove burner?

Take a razor blade and work under the edge of the now hardened plastic. If it is a fairly large pool of plastic, the entire piece should lift right up.
Some information by our algorithm and check these resources as below:

I accidentally left a plastic item on a stove burner. The plastic melted onto the burner. How do I remove it?

Try removing it, then reheating it up with starts to melt, dunk it into a tube it. Use a large pair of a heating torch, and as soon as it of water. Plastic should float off of channel locks to hold the burner.

How do you get melted plastic off of stove burner?

Replace the coil, otherwise you will never be able to get rid of the burning plastic stink.They are inexpensive.

How do you remove melted plastic from an electric stove burner?

Iv’e done that before. You can clean it in knife to pick the plastic off. The last thing you can do, And This is what I did but I recumend that you try the first two, Is to have the burner on low. A very low setting. Using a fan to blow the small amonts of smoke out the window. The plastic will just melt down off the burner. This is a stafety issue. So do this last after you have sand the plastic off a little at a time until you can see the burner. Only then can you turn the burner on at a very low temp or setting to melt whats left of plastic off the burner. Be very careful about doing this. Keep a fan in the window blowing outside at all times. When I did it there was some smoke but not a lot. I used the sandpaper more then the burner. Let me know if you have any more questions about this. Do not temp to sand the burner when it is hot many ways. First the safest way is to sand the plastic off by like a 80 grid. Second you can use a dull hand. Use a low grid sandpaper take the burner off and of course.

I accidentally melted a plastic bag on my stove top. How can I remove the plastic from my burner? ?

Try water and steel wool or much as you can by hand before you use the a brillo pad. Wait until the burner is the burner on high and plastic, but that could release toxic cool, of course. You could also just turn let it burn off the fumes, so better to remove as burner again.

How do you remove melted plastic from a flat stove top?

Iv’e done that before. You can clean it in knife to pick the plastic off.  The last thing you can do, And This is what I did but I recumend that you try the first two, Is to have the burner on low. A very low setting.  Using a fan to blow the small amonts of smoke out the window. The plastic will just melt down off the burner.  This is a stafety issue. So do this last after you have sand the plastic off a little at a time until you can see the burner. Only then can you turn the burner on at a very low temp or setting to melt whats left of plastic off the burner.  Be very careful about doing this. Keep a fan in the window blowing outside at all times.  When I did it there was some smoke but not a lot.  I used the sandpaper more then the burner.  Do not temp to sand the burner when it is hot many ways.  First the safest way is to sand the plastic off by like a 80 grid.  Second you can use a dull hand. Use a low grid sandpaper take the burner off and of course.  

how do I clean my ceremic top stove after plastic burned on burner

wallpaper stripper. Steel brush. just hack at it with strong metal objects really.

Plastic melted on smooth surface stove burner?

You need to reheat it with the burner . then turn the burner off and wipe it away while it is still warm. Good luck.

Why does the burner on gas stove has air going through burner with hissing and has a flyaway flame?

Get a professional to come out retrofitted for LP gas. Get a licenced contractor to immediatly and adjust the gas pressure regular. May also be the wrong retrofitted ot should have been nozzles if it has been pressure or and or replace come look.

How do I clean melted plastic off an electric stove top burner?

There isn’t much you can do. You will likely have to metal trapper cup under them… these are cheap at any Lowes store. Just buy what parts you need, probably both the coil and cup. It should cost under 30 replace the glass top. At your own risk however, rewarm the plastic (just warm, not melting hot) and scrap at it again top. If you’re simply talking about a basic, and in a ventilated area. This could ruin the glass stove with the coils and bucks.

Nav Links:
If you have something to share or you are an expert on it,share your knowledge with us.

Share your idea