Questions and Answers Available
You are here : Askhoo » Maintenance & Repairs » Currently Reading:

How do I Put Together a Metal Bed Frame

You may have similar questions as How to Assemble Adjustable Bed Frame and How to Set up a Bed Frame,or you may also seek several useful information about How Do I Put a Queen Size Bed Frame Together. In addition,you may be interested in answers related to Bed Frame Instructions,too. Read more as following:

Most metal frames assemble by the notches and posts at the corners of the frame. You would just start at one corner and duplicate the next three corners.

Some information by our algorithm and check these resources as below:

How to Assemble Adjustable Bed Frame?

Adjustable bed frames have several notches that you can attach the short end of the bed frame too. The farther out the notch, the larger the frame will be…. More »

How to set up a bed frame?

1. Measure the width of your bed. Even though mattresses come in standard sizes, individual mattresses vary in size because of settling and their pliable nature. 2. Set the rails of the bed frame on the ground in the approximate dimensions of the bed… More »

How do i put a queen size bed frame together?

1. Place the bed frames pieces on the floor. Check the manufacturer’s instructions to ensure that you are not missing any pieces. 2. Connect the footboard frame to the running boards. Place the bolts of the end frame into the holes of the side frame… More »

How to put together a metal bed frame?

1. The first step to putting together your new metal bed frame is to take it out of the box or if it is not boxed make sure you have all of the parts. It is usually a good idea to make sure you have all of the legs before starting assembly. 2. . jQue… More »

How to put together a metal king bed frame?

1. Mark the footprint of your bed frame, using a tape measure, where you plan to position the bed. A standard king-size be measures 76 inches by 80 inches; a California king measures 72 inches by 84 inches. 2. Clear any furniture or other items out o… More »

How to Put a Bed Frame Together?

First you will find a husband and wife to attempt to put it together. You then will give them the directions in French and then walk away. When you come back you will have a mattresses on the floor and that is the way it is staying! This site might h… More »

Nav Links:
If you have something to share or you are an expert on it,share your knowledge with us.


  1. Yanty says:


  2. Music Man says:

    my friend gave me a bed frame but no screws and i want to figure out whats screws i need to build it. all i have are the bar code but she does not remember where she got it . what should i do?

  3. Miguel B says:

    the whole frame and sprayed WD40 before putting it back together. Would that stop the sqeaking? Granted it’s not very expensive but I cant buy a new frame now. Does anyone think this will work or have any other ideas?

  4. Karo Miyuki says:

    Its an antique and does not have screws holding it together. It just has puzzle piece like ends on the two beams that run along the bed where you would put the mattress locked into the head and the bottom of the bed. Any ideas on how to get the pieces unlocked from eachother?

  5. Leandra says:

    It sounds to me like you get either a frame and matress only or legs, box springs, and matress, is that right?

  6. April says:

    I have a wood futon frame that folds out so it turns from a bed to a couch. The corner joint is held together by nails and has broken off. The nails won’t screw back in. I’m afraid that if I use larger nails it will crack the wood. I’m thinking of using joints to put them together.

  7. Aakriti says:

    I put the two twin beds together but the gap in the middle was 4-5inches long because of the bed design. What kind of twin bed connector should I use for that big gap?

  8. Savannah Bard says:

    I have this red bunk-bed and every time I go to sleep it creaks so loud you can hear it from upstairs! My dad doesn’t want to oil it for some reason and its really annoying! Please help!

  9. Saxgal739 says:


Share your idea