Questions and Answers Available
You are here : Askhoo » Maintenance & Repairs » Currently Reading:

What is Plumbers Putty Used for

You may have similar questions as How to Use Plumbers Putty and How Long Does It Take for Plumbers Putty to Dry,or you may also seek several useful information about How Long Does Plumbers Putty Take to Set. In addition,you may be interested in answers related to How to Use Plumbers Putty on Kitchen Sink,too. Read more as following:

Plumbers putty is used for sealing drains. You will want to take a small amount and work it in you hands to soften it up and then roll it into a line. Place it where the drain is going to go, place drain in and tighten. Wipe away access putty.


Some information by our algorithm and check these resources as below:

How does one use plumbers putty?

Plumber’s Putty will get soft the more you work with it from your body heat. Roll it out in your hand to get the shape of what you’re applying it to. Apply the putty and tighten your fitting and it will ooze out. Clean off the excess and you should h… More »

How long does it take for plumbers putty to dry?

Plumbers putty never dries completely; It is ready to go as soon as you install it…. More »

How to use plumbers putty on a bathroom sink drain?

1. Clean the recessed area of the kitchen sink with the putty knife to remove any large debris that will interfere with the application of the plumber’s putty. 2. Spray the ammonia-based household cleaner around the base of the sink, and let the clea… More »

How to Use Plumbers Putty for Garbage Disposal Repair

Sometimes in the normal course of operation, a garbage disposal will develop a hole or crack in the housing body, causing the disposal to leak. This can happen for several different reasons — something as simple as the natural aging process or somet… More »

How to use plumber’s putty on kitchen sinks?

1. Turn the sink upside-down and place on a flat surface. 2. Roll thin ropes of plumber’s putty between your open palms, placing the putty on the underside of the kitchen sink around the lip where it rests on the countertop of your cabinet. When fini… More »

Nav Links:
If you have something to share or you are an expert on it,share your knowledge with us.

10comments

  1. Electric_wolf says:

    I’m talking about the plumbers putty that’s supposed to be used to seal the sink ring to the sink on a garbage disposal assembly. Thanks.

  2. Goat says:

    I am redoing my kitchen and replaced the screens in the bottom of sink? The instructions said to place plumbers putty underneath the metal flange to form a seal between the flange and the sink.So how long before we can wash dishes in the sink?

  3. Co0k!3_sage says:

    Do I use plumbers putty or caulk it in?

  4. Meowmeowmeow says:

    Tried cleaning all pieces. Made rope of plumbers putty, slipped it under flange and then tightened down. Looks like most of putty oozed out. water does not drip from under sink, it just runs into drain.

  5. Vanessa says:

    I just replaced the drainage pipe that comes after the sink strainer. I used plumbers putty to cover all the areas water can come out from. What should be done to prevent water from coming out where the sink strainer and drainage pipe meet because water still manages to get out?

  6. Aubrey says:

    I just replaced the drainage pipe that comes after the sink strainer. I used plumbers putty to cover all the areas water can come out from. What should be done to prevent water from coming out where the sink strainer and drainage pipe meet because water still manages to get out?

  7. Miranda says:

    I put in a new shower and need to install flanges around tub/shower control knobs do I use plumbers putty ,silicon or latex caulk ? Please give me step by step as to how much to use.

  8. Viv says:

    I had a hole in the original pipe and had to replace it with PVC. I used teflon tape and plumbers putty and I still have a leak when the washer drains. Originally, the pipe was a solid metal. Was it okay to replace it with PVC, or should I have gotten another metal pipe?

  9. Gaboy0530 says:

    I attempted to use the old gaskets and pipe dope to seal the threads, but the dang thing still leaks. Do you need to replace all gaskets every time you take apart a plumbed line? Do I need to use plumbers putty instead of pipe dope? any help would be excellent!

  10. Starry Eyed says:

    nice

Share your idea